High Voltage Insulation Plastic Sheets:
High Voltage Insulation Plastic Sheets and Rods can be made in any thickness from 15 mils up to .250 inches. Fluoro-Plastics technology makes it possible to make in-between sizes. Thickness tolerances range from .0005 for sizes from .002″ thick to .005″ thick up to .003″ tolerance for material that is over .060″ thick. Skived sheet is ideal as a slide surface, for chute liners, other kinds of liners, or for cutting or stamping into gaskets (asbestos substitute) and diaphragms, including complex stamped gasket configurations. It comes in sheets from 60 inches by 60 inches square to rolls 60 inches wide. Standard sizes are 48 inches square, twelve inches square, twenty-four inches square, thirty-six inches square, and rolls one, two, three and four feet wide are available for clicker press fabricators. Material may be ordered in long lengths as individual sheets. The material can be wound on a three inch cardboard or PVC core: All interim thickness sizes are available on special order, and rolls may be silt to interim widths. The material may be ordered etched for bonding on one or both sides for an additional charge.
High Voltage Insulation Plastic Rods:
The SK Jain Insulations high voltage insulation plastic rods have been designed for the safe discharging and earthing/grounding of high voltage cables and test units and is perfect for damped discharge and direct, visible earthing/grounding. It’s tip houses a live conductor and the rod features a discharge resistor that limits the discharge current and ensures a damped discharge. The rod is able to eliminate a post charging effect by almost instantly removing the cable charge.
The discharge rods are made of fibre glass strengthened plastic, come with a handle, and have a conservatively rated clearance against physical contact with high voltage.